Model #66516379300 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts And Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore DW control panel will not light up the buttons 66516379300 Kenmore Undercounter dishwasher

A:

Thank you for your quesion. I am sorry you  are having problems again with the dishwasher. You do have a 90 day warranty following repair if the failue is related to the original repair. There is no way to detemine this unless the techniian returns.  Use this Sears Home Services link to reschedule online or call.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
October 12, 2013
Q:

What year was dishwasher model 665-16379300 manufactured and sold?

A:

Good morning.... If you could include a serial number we would be happy to research that information for you. Respond to this thread with the additional information and we will get back to you within two business days if not sooner. Until we hear from you, have a nice day.

Read More
Henry -
February 11, 2013
A:

Thank you for your question and I understand your concern.

In order to provide the date of manufacture, I will need to know the serial number. 

I added an image below showing how to determine the year and week of manufacture.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

 

 

Read More
Joey S -
Sears Technician
February 11, 2013
See more answers
Q:

Strange noise coming from kenmore ultra wash dishwasher

A:

I am sorry to hear about the difficulties. Managemylife.com can take the mystery out of the repair. Your expert can help you determine what is happening with this appliance. I did some research for you at this web page and found an expert answer to a similar question which may shed some light on the problem. If you decide to schedule service, and have a qualified technician to assist you, I have attached the link to searshomeservices.com. I hope this will be useful until your expert can respond.

Read More
James -
July 18, 2012
A:

Thank you James. The first link led me to a video that shows how to remove the chopper assembly.

Read More
Anonymous -
July 18, 2012
A:

I know that it can be very frustrating to have issues with your dishwasher. It can be hard to accurately predict the source of noise problems in a dishwasher without physically being at the product to hear them. You did not mention whether you checked the mounting brackets. Make sure that these are secure and installed according to the installation guidelines. Try running the dishwasher without dishes to see if the noise is being caused by items vibrating against each other during the cycle.

You did not mention whether the noise is constant or whether is confined to a particular stage of the wash cycle. If the noise only occurs when the dishwasher is draining, you could have a drain hose that is vibrating against the cabinet opening. To fix this type of problem, you could use a cloth in the opening to eliminate this type of noise. You could also have an item stuck in the drain pump (or just a noisy drain pump).

It could also be that a bearing in the wash motor would be making this noise. This type of noise would be coming from under the dishwasher tub. If you pulled off the bottom front kick panel, this type of noise would be more apparent. You can check for this problem as a source of your noise, but I doubt that this would be causing it.

Make sure that the tub sound shield is properly in place. If not, you could be hearing normal dishwasher sounds that are not being properly dampened due to the sound shield not being properly in place.

I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 18, 2012
A:

Annej, Thank you for the feedback. The noise is constantly there during the entire wash stage. It is not present during tub filling/draining, or drying. The pitch and loudness of the noise varies almost rhythmically. After removing the chopper assembly and not finding any debris other than a small amount of lint, I put everything back together and then removed the bottom front kick panels. While the dishwasher was empty, I started it up and the noise appeared again at the beginning of the wash stage. The noise is definitely more prevalent from under the tub. However, using a flashlight to view the components under the tub I was unable to observe any vibrating or loose items. After ~10 minutes of listening and looking, I pressed the Cancel button and the noise stopped immediately. Thanks for your help! Jonathan

Read More
Anonymous -
July 19, 2012
A:

Anyone have any recommendations or suggestions? The dishwasher is almost 9 years old but only used 2 or 3 times per week. Thank you, Jonathan

Read More
Anonymous -
July 20, 2012
A:

Thank you for replying, Jonathan and thank you for your patience. It does sound like the problem is coming from the pump. It is possible that you could have a worn or loose part. However, this would mean replacing it. If the pump is working, then I would wait until it stops. Please let me know if you need anything else. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 22, 2012
See more answers

Top Parts