Model #66516374300 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts And Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Changing the Impeller Kit on a Kenmore Dishwasher 665.16374300

A:

Replacing a part on a dishwasher can be pretty difficult without the proper instructions. While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue. I have added the link below. Hope this helps!

Read More
Yadira B -
November 26, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the dishwasher. The impeller is threaded onto the motor shaft. To remove the impeller you need to keep the motor from turning. This can be done by inserting a screwdriver into the fins on the motor. Be sure to hold the screwdriver near the base of the fins. This should prevent them from breaking. Then turn the impeller counter clockwise by hand to remove it.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
November 27, 2012
See more answers

Top Parts