Model #66516263400 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Lower Dishrack replacement 665.16263400

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your freezer. Upon researching model 665.16263400; the transport and wheel assembly has not been updated. The original ones are used. The rack is the only item to be updated. If it is not fitting correctly it would be best to contact our parts customer care. It could be a case where the wrong updated part was sent.

Thank you for choosing Sears. Have a great day.     

Read More
Jeff Wallace Jr -
Sears Technician
October 14, 2014
Q:

Kenmore Elite Dishwasher Control Panel Power 665.16263400

A:

Thank you for choosing SearsPartsDirect. I can certainly understand how frustrating it can be when your dishwasher is not working. I did look into the model number you have provided and I have found information to assist you. 

You will need to test the fuses and the control board to determine which to replace. 
F9 fuse-measure resistance. Fuses are on bottom of control board, but can be checked from top side,
If <3 ohms, then fuse is ok
If >3 ohms, then fuse is open. 

If it is open it will need to be replaced. 

The control board should measure 120/240 volts. If it does not then the board needs to be replaced. 

 If the dishwasher will not do anything when you enter the diagnostics, the problem could be the touch pad. I recommend entering the diagnostics again. Then close the door and push the start button. Then wait one to two seconds and push it again. Push the button about 15 times. This should advance the control to the next step in diagnostics. If it will not advance, the problem is likely a faulty start button. 


I have attached the information to test your unit.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .


Thank you for your question. Have a great day. 

 

Read More
Natasha12 -
Sears Technician
July 10, 2014
Q:

The 3rd-level wash spinner came off of the feed tube assembly. 66516263400 Kenmore Elite Dishwasher

A:

Thank you for contacting SearsPartsDirect.com with your question about the wash spinner for your Kenmore Elite Dishwasher. I am so sorry to hear the spinner came off. I will be happy to help you with this.

It sounds like you are missing the retainer. The pin should come down through the hole in the top of the assembly and then the retainer should clip onto the bottom of the pin holding it in place. The retainer is available as a separate piece but I recommend you replace the spinner assembly. There are two reasons the assembly is the better option. The first is that there isn't a way to tell why the retainer came off, so just replacing the retainer may not solve the problem. The other reason is that in this case, the spinner assembly is actually cheaper than purchasing the retainer. I have included both links for you.

Spinner retainer for Kenmore Elite dishwasher 66516263400

Spinner assembly for Kenmore Elite dishwasher 66516263400

I hope this answers your question. If you need further assistance please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
March 10, 2014

Top Parts