Model #66516014402 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore dishwasher question

A:

I can understand how important it is to have the right information for your dishwasher. On this model there is a chopper assembly inside the pump. This will remove the debris that gets into this part. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 16, 2013
Q:

I need instructions for how to install a Kenmore Dishwasher door seal

A:

Thank You for contacting ManageMyLife.com

I understand how important it is to have instruction when completing a repair. The door seal is a press fit gasket. The old gasket should simply pull out of the channel, unless someone glued it in place with silicone. The new gasket should press into the channel. You should have no problem in removing and replacing the door seal.


If you have further questions please let me know.
Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
September 15, 2013
Q:

green light flashing clean dishwasher 66516014402 .why is it doing this i followed trouble shooting steps not able to diagnose issue .

A:

I know how important it is to have a good working dishwasher in the home so that you can keep your dishes nice and clean. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Joseph P. -
January 14, 2012
A:

Hi Tonya,

Thank you for submitting a question to Manage My Life.

When the clean light blinks on this type of dishwasher it usually indicates a heating fault. The tech sheet directs us to run the service cycle and then if the fault returns check the heat circuit. The remaining checks will require the use of an ohm/volt meter and you will have to perform ohm checks and/or live voltage checks. If you have a meter and are confident in your ability to safely perform these checks, reply to this post and I will be happy to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here, and if I may be of further assistance, include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
January 16, 2012
See more answers

Top Parts