Model #66515979992 KENMORE Dishwasher

  • Door And Panel
    3 Results
  • Control Panel
    3 Results
  • Door And Latch
    3 Results
  • Lower Washerarm And Strainer
    3 Results
  • Heater
    3 Results
  • Fill And Overfill
    3 Results
  • Upper Wash And Rinse
    3 Results
  • Tub And Frame
    3 Results
  • Pump And Motor
    3 Results
  • Upper Rack And Track
    3 Results
  • Lower Rack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What is wrong when my Kenmore model 665.15979992 dishwasher won't drain?

A:

You don't provide much detail about the no draining but there are some things to consider.

The image below contains a parts break down of your dishwasher and if it is not draining at all and the motor is running then most likely the drain impeller is stripped.

The motor must be running for the dishwasher to drain.

The motor runs one direction to wash and one direction to drain. If the motor doesn't reverse directions then the control is most likely at fault.

If the motor reverses and the dishwasher is not draining then the drain impeller (part key 24) is most likely stripped.

It's also possible the check valve (part key 15) is the problem. One way to check this is with the tub full of water remove the drain hose and lower it and see if any water drains out. If no water drains out then most likely the check valve is the problem.

There may be something in the sump blocking the water from draining out. The 2nd and 3rd image shows how to get into the sump and check for obstructions that might be blocking the drain.

The drain impeller is part number 675806 and can be obtained from the following link: Sears PartsDirect .

I hope this information helps to resolve this problem but submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
September 23, 2009
A:

The diagrams attached to this response are too small to make sense out of. When I expand them, they're too blurry to understand.

Read More
Bob Comerford -
January 07, 2016
See more answers
Q:

Flashing lock on light, stopped in normal cycle 66515979992 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 66515979992; you can reset the unit by unplugging the dishwasher power cord for 5 minutes then reapplying the power. If the problem continues then the electronic control board may be at fault. You can schedule an appointment to have a certified tech remove and send the control board for repair, to schedule an appointment you call 1-800-469-4663 or click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 24, 2015
Q:

check the chopping blade 66515979992 Kenmore Dishwasher

A:

Thank you for your inquiry on your Kenmore Dishwasher, Model: 665.15979992. From reviewing the details on your model, it appears that the chopper blade only comes with the impeller kit. I have linked up the impeller kit below. I have also included a link to a couple of videos that advise how to install the new impeller chopper blade.  

Click Here For Kit

Click Here For Videos 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
March 31, 2015

Top Parts