Model #66515962990 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Model # 665-15962990: Tine Clip (8268816) - number of clips in package? 66515962990 Kenmore Dishwasher

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number 66515962990 and the part number for the clip for your model is 9743017 item 4 and is sold individually. If 3 are needed, 3 individual clips will need to be purchased. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 24, 2014
Q:

No lights on control panel 66515962990 Kenmore Dishwasher

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

 

Read More
Joseph P. -
May 08, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dishwasher not turning on. We are here to help. I suspect the thermal fuse is blown. The thermal fuse is located in the control panel. This part can be checked with a multimeter, to confirm that it is bad. The image below show how to replace the thermal fuse. The part number is 675813. When installing the thermal fuse, make sure you use everything in the kit. I hope this helps.

To order dishwasher parts, please visit SearsPartsDirect.com with the model number.

If you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and follow the instructions, then click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
May 09, 2013
See more answers
Q:

problem with kenmore dishwasher

A:

Having a broken Dishwasher must be really frustrating. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray -
September 26, 2012
A:

I cannot tell whether that spring still has any tension from the picture that you sent. Here is a link for a previous answer that has a video showing how to replace the spring: Need instructions for assembly of detergent cover, hinge pin, and spring - slipped out somehow and spring has no tension dishwasher model #66515962990 . I recommend that you make sure that the spring is loaded with tension by installing it as shown in that video. If the spring does not work properly, then you can replace it. You can order the spring from this page: Spring for Dispenser on Kenmore Dishwasher Model 665.16798792 .

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
September 28, 2012
See more answers

Top Parts