Model #66515831791 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I cant get my dishwasher to come on.( kenmore ultrawash model 66515831791) 66515831791 Kenmore Dishwasher

A:

Thank you for choosing sears I would be happy to help you with your dishwasher. Upon researching model66515831791; its sounds like you may need to replace the power module, the power module sends voltage to the dishwasher components to activate the different features of the unit depending on the button selected. When the power module fails it can cause the dishwasher not to turn on. I have posted a link below of the power module.

I trust this information will help you, have a great day.

                                                                                                                                                              

Read More
CarlosZ -
Sears Technician
February 03, 2015
Q:

Need help replacing the impeller in my Kenmore Dishwasher 665-15831791

A:

Thank you for your question. I am sorry you are having a problem with the dishwasher and you will need to remove the center bolt (key 12 in the diagram).You will need a wrench to hold the impeller in place while you loosing the bolt. The copper blade and the spring have to below the filter plate. Once you are ready to install the screw in the center push down on the impeller. The pump seal in the bottom is spring loaded and has to be compressed. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website:Sears Home Services . 

 

 

http://www.managemylife.com/images/101-stored/100565/original/image8144817042419563802img-or.jpg?1379973896

Read More
Sherman_G_Wallace -
Sears Technician
December 05, 2013
Q:

Kenmore Ultra Wash 665.15831791 blinking Pots and Pan light

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
November 10, 2012
A:

The blinking light on the control indicates that the Pot & Pans key is stuck. The control panel (part 3379320) would normally have to be replaced to fix that problem. That replacement part is no longer available due to the age of that dishwasher. The part could be removed and sent to Core Centric Solutions for repair. If you remove that part for repair, be sure that you shut off the house circuit breaker for the dishwasher before accessing internal components. Here is a link for the Core Centric Solutions: CoreCentricSolutions.com . That website has contact information. The cost for repairing that control panel part will normally be around $150.

Based on the age of this dishwasher, you may consider replacing it instead of repairing it.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
November 13, 2012
See more answers

Top Parts