Model #66515829000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenmore 66515829000 66515829000 Kenmore Dishwasher

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

It could be an issue with the control panel. If it’s not going thru the cycles correctly and stay in a cycle too long then it will pop that fuse to save it from doing any more damage. I would suggest to replace that control panel and this should solve your issue. The correct part number is 3384563.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

 

Read More
JeffwallaceIII -
Sears Technician
February 02, 2015
Q:

top rack not getting cleam 665.15829000

A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. That play is suppose to be there, the main thing this sounds like is a lack of water flow up to the sprayer. I would suggest a deep clean in the dishwasher. I have a great video that shows you step by step instructions on how to get that dishwasher back to normal. I have provided the link below. Hope this information has help you. If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.

Read More
Samantha A -
Sears Technician
July 02, 2014
Q:

How do you install the holder over the manifold of a Kenmore dishwasher? The opening is to small to fit over either end of of the manifold.

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 48 hours with detailed information. I have attached a link to Sears Home Services if you decide to schedule service. Thank you for using Manage My Life.

Read More
Alina -
April 20, 2013
A:

Thank you for your question.  I am sorry you are having a problem with your Kenmore 665.15829000 dishwasher

The manifold snaps together on the upper spray arm. Generally you need to squeeze the middle of the manifold, so it will separate from the spray arm. The manifold needs to be separated from the spray arm end, so it can slip thru the tube holder. The other end of the manifold is flared and will not fit thru the hole of the holder. If this is not helpful please respond back to this thread with the complete model number of the dishwasher. I hope this helps.

Please feel free to let me know if you need further assistance. We are always here to help.

Read More
Fred M -
Sears Technician
April 22, 2013
See more answers

Top Parts