Model #66515824000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore dishwasher 665.15824000 error code 66515824000 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help you with your dishwasher. Upon researching model 66515824000; you can reset the unit, to start unplug the dishwasher power cord for 5 minutes then reapply the power. If the problem persists then you may need to replace the electronic control board. The control board governs the functions of the dishwasher so when it fails it can cause the control to become unresponsive, I have posted a link of the electronic control board to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 11, 2015
Q:

Buzzing noise while draining 66515824000 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 66515824000:  it sounds like there may be something stuck in the pump. You can unplug the dishwasher power cord and clean the pump filter also make sure that there is nothing stuck in pump. If the problem persists then the pump may need to be replaced.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 04, 2015
A:

I disassembled it as far as the pump filter and cleaned it, but it still buzzes while draining. During a rinse, the spray arm rotates, and it sounds normal. It's only while draining that it makes the noise. What does the pump do differently while draining?

Read More
Anthony -
May 04, 2015
See more answers
Q:

Kenmore Dishwasher 665.15824000. Unit about 10 yrs old, the quite rinse light comes on and nothing happens.

A:

Error, it is the Quick rinse light.

Read More
James -
November 16, 2013
A:

Thank you for your question. I am sorry you are having problems with your dishwasher. The model number does not appear to be a valid number, but I should be able to offer some general help. Try pressing the Cancel/Drain to clear the Quick Rinse light. Sometimes, you need to hold down the cancel button a couple of seconds longer. If that fails, try shutting off the power to the unit for about three minutes, then reconnect power. If the Quick Rinse continues to stay lit and the dishwasher does not work, this is likely a problem in the user interface or control and one needs to be replaced. I would recommend having a technician diagnose. If you feel it will be more cost effective to consider a replacement, you can view a wide selection at Sears .  If further help is needed, please reply.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
November 17, 2013
A:

I am having same problem with my dishwasher with model number 665.15824000. How do I know if it is the control panel or control board?? Is there anything else I can check while it is apart? Thank you

Read More
Diana -
January 26, 2015
See more answers

Top Parts