Model #6651581591 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dishwasher won't run. Panel lights are on. Model#6651581591

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dishwasher is not working.

 I recommend trying to enter the diagnostic cycles. 

Pressing the following option keys in the sequence shown willeither start the Diagnostics Cycle or turn on the Rapid Advancefeature for customer selectable cycles:
HI TEMP WASH, AIR DRY, HI TEMP WASH, AIR DRY or
POWER SCOUR, AIR DRY, POWER SCOUR, AIR DRY
(HI TEMP WASH = HIGH TEMP WASH = WATER HEAT)
(POWER SCOUR = SUPER SCRUB)
(AIR DRY = ENERGY SAVER DRY = NO HEAT DRY)
If the sequence is entered after starting a cycle, the Rapid
Advance feature is turned on, which allows the operator to
manually advance the currently running cycle, interval by
interval, by pressing the Pots & Pans/Antibacteria or
Heavy/Soak & Scrub key.

Also we will need more detail of what is going on with the unit. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
December 04, 2014
Q:

model # search not finding model 665.1581591

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner. Have a great day!

Read More
Alina -
January 19, 2013
A:

Thanks for submitting your questions Thomas. I'm sorry to hear your having trouble with the website. I was able to locate the information for your model. I Have included a direct link to our Parts Direct website which has the parts diagrams for your model. What parts are you needing for your Dishwasher?

Read More
Desirea -
Sears Technician
January 19, 2013
See more answers
Q:

Dishwasher stops working.

A:

Dishwashers are great appliances we turn to when it comes to washing all the dishes so when it starts to have issues it can be really frustrating. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
May 22, 2012
A:

I recommend that you check the wiring connections on that door switch. A bad wiring connection could cause that problem. There was a safety recall on the door switches and wire harness on that model of dishwasher with serial numbers between FA2400000 and FB1899999. If your dishwasher falls between those serial numbers and the rework kit was not installed on that dishwasher to fix that safety issue then I recommend that schedule service through this link: Sears Home Services .

Based on the age of the recall, it is likely that the rework kit has already been installed on that dishwasher if it fell in that serial number range.

A short in the wiring harness or the control board could also cause that switch to overheat. A bad component or a number of other problems could also result in that burnt door switch. You can shut off the house circuit breaker for the dishwasher and examine the wire harness and the connections. If you are not able to find the cause of that problem on your own, I recommend that you have a service technician examine the dishwasher. You can use that same link that I provided above to schedule service.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 23, 2012
A:

Thank you. How can I tell if the safety rework kit has been installed? Do you happen to have a wiring diagram for this dishwasher? Thanks in advance.

Read More
Chester -
May 29, 2012
A:

I did some further research on that rework kit installation procedure. If that rework kit has been installed, then you should see black dots on each side of the model number label as shown in the image below. If that rework has not been completed, I recommend that you schedule service by a Sears Technician.

Read More
Lyle W -
Sears Technician
May 29, 2012
See more answers

Top Parts