Model #66515791790 KENMORE Dishwasher

  • Door
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I remove the water tube to install a new pump/motor on my Kenmore dishwasher?

A:

Please see the image provided for instructions on removing the water feed tube.

First turn the power off & remove the lower inspection panel, unplug the motor harness & remove the drain hose. Have a shallow pan & some towels handy. Reach around the motor & turn the locking devices 90 degrees to release the motor from its mounted position.

This information & the rest of the motor removal instructions are provided for you in the images below.

You do not have to pull the unit out unless you want to. The motor can be removed without pulling the unit out.

Read More
biker dave -
Sears Technician
August 31, 2009

Top Parts