Model #6651578581 KENMORE Dishwasher

  • Control Panel Parts
    3 Results
  • Heater, Pump And Lower Sprayarm Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub Parts
    3 Results
  • Door And Toe Panel Parts
    3 Results
  • Dishrack Parts
    3 Results
  • Wiring Harness Parts
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I'm trying to fix my ultra wash dishwasher. model 15891791. how do I remove the drain impeller part # 24? it doesn't freely come off.

A:

Hello, having a non working appliance can be very disappointing especially when its a dishwasher not working. A dishwasher is a very handy appliance that helps wash the dishes while you do other stuff at the same time and is less messy. While I was searching for a response on your question here on Manage My Life I saw that there were similar questions like the one you have with responses from a expert. I have attached the link below if you are interested in viewing the site. Hope this helps!

Read More
Alina F. -
June 26, 2010
A:

You have received some good information that should help you but I'm listing a site you can access, that will explain and show more pictures of how to remove the impeller. How do I get the inner impeller and pump base off of my Kenmore dishwasher model 665.1578581? . I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Safety Notice: Be sure to disconnect the appliance before performing any troubleshooting procedures. If you are not comfortable with doing any voltage checks or repairs that might be recommended, please contact a local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Scott D -
Sears Technician
June 29, 2010
See more answers
Q:

How do I get the inner impeller and pump base off of my Kenmore dishwasher model 665.1578581?

A:

The disassembly procedure for this type of pump is shown in the images below. Your pump may look slightly different than the one shown below but the basic procedure is the same. This should help you pull the pump apart. If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
April 09, 2010
Q:

How do you get the impeller off of the motor shaft on a Kenmore dishwasher model 665.1578581?

A:

I assume that you already have the pump outlet off of the top of the impeller. The top of the impeller should have a hex type shape fitting with flat edges so you can hold it with an adjustable wrench while you remove the screw from the impeller. Once you remove the screw, you should be able to pull the impeller up and off of the motor shaft. Since this is an older dishwasher, the impeller may be difficult to remove. If you are not able to remove it, I recommend that call a service technician to repair the dishwasher. Here is a link for the Sears Service website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 08, 2010

Top Parts