Model #66515769000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

leaking 66515769000 Kenmore Dishwasher

A:

Thank you for your inquiry on your Kenmore Dishwasher, Model: 665.15769000. From reviewing the details on your model, you could have a crack in the tub or the vertical stem in the tub that holds that float. Check for damage in that area. A crack in the tub should be covered by the limited lifetime warranty if that is a plastic tub.If you see no problem with the tub, then I suspect that you may have loose screws in the pump outlet. Loose screws in that component could cause a wave action in the tub. The water may slosh over the top of that stem for the float valve and it may also splash over the front lip of the tub. Remove the lower spray arm and check those screws if necessary.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 04, 2015
Q:

The top section of the outside door has separated from the liner. 66515769000 Kenmore Dishwasher

A:

Here's an image that shows how to remove the front panel and inner door panel on that dishwasher: How to Remove the Door Panel on a Kenmore Dishwasher.

Unplug the dishwasher or shut off the house circuit breaker for the dishwasher before removing any panels.

Once you disassemble the door, you should be able to find the cause of your problem. Examine the components and replace any worn or broken parts.

If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
March 11, 2015
Q:

dishwasher not draining fully, dishes are not getting clean. 665.15769000

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dishwasher.  

From the information you have provided above, it seems to me like there may be a clog in the drain system. I would suggest checking if there are any clogs in the drain hose. Clean out anything that may be blocking the hose. Also do the same for the pump. If you see any debris or clogs in the pump make sure you clean everything out. if both the hose and the pump seem fine, then its most likely looking at a new pump for the unit. the part number for the pump is W10428168.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 23, 2015

Top Parts