Model #66515761690 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

water leaking from right frount conner 66515761690 Kenmore Dishwashers

Q:

Kenmore Dishwasher Model 66515761690 Question

A:

Having to go throw all these problems with your Dishwasher can be a really big headache. A suggestion I have is to set service with a Sears technician to find out what is going on with your appliance and found out the cost it will be to repair Dishwasher. I have attached the link below. I have attached the link below. Hope this helps!

Read More
Dezeray S -
August 15, 2011
A:

Thanks for your help.

Read More
robert -
August 15, 2011
A:

Thank you for your question and I understand your concern.

Based on your symptom and details; the timer most likely has insufficient torque and it's stalling in the dry cycle. Replace the timer and it should resolve the issue of the timer stalling in the dry cycle. The timer will cost approximately $105.00 and the service fee would cost approximately $130.00. Based on the age and cost of repair I believe it would be better to replace the dishwasher.

I added a link to Sears.com with a listing of dishwashers on sale to check out.

Read More
Joey S -
Sears Technician
August 16, 2011
A:

Thanks I agree replacing is the long term cost effective solution.

Read More
robert -
August 16, 2011
See more answers
Q:

Kenmore dishwasher model 665.15761690

A:

Nobody wants to have to deal with this issue. Upon researching your question I found a couple links that will provide you with some helpful information about this issue. I hope this helps!

Read More
Jackie S -
June 30, 2011
A:

Hi Brad,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your dishwasher.

Most likely the screws on the top of the sump assembly are loose causing a wave action pushing water over the front lip.

Tighten the screws all the way around the sump cover, and you should be in business.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Try this and report back with your findings. I am looking forward to assisting you again in the near future.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
June 30, 2011
See more answers

Top Parts