Model #66515751791 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


Kenmore dishwasher model 665.15751791 no power. Stopped in mid cycle. Wall outlet has power and breaker on


A dishwasher is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience.  While you are waiting for an expert to respond, I have added a helpful link (click here) that may provide information to assist you with your question.

Read More
Yadira B -
July 24, 2013

Thank you for your question.  I know that it is upsetting to have appliances just stop. Some additional detail may help. Does it display lights, start, then stop while filling, while washing or when it should be draining. Does it reset to start again at any point? I see Yadira provided a good link with possible causes.  This is may be the door switch. Try pushing in on the door latch and pressing start again. Disconnect power to dishwasher. Remove inner door panel to access door switch. Remove the wires attached to the switch on the door handle and the door handle itself. Pay attention to wire connections. It may help to make drawings or take a picture before disconnecting wires. You will need to cut the wires, strip them and use the connectors in the kit to connect. The part number is #3369325 and can be ordered at Sears Parts Direct for about $41. If this does not cure the problem, it may be the timer which is $129 or the console.  I see this dishwasher is about 16 years old. It may be time to think about replacement. If further help is needed, please reply.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
July 25, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show