Model #66513944K010 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel And Latch Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump, Washarm And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Control panel lights are dim or won't go out. 66513944K010 Kenmore Elite Undercounter dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dishwasher. Upon researching model 66513944K010; I have posted the diagnostic entry sequence. Click here for diagnostic entry.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 13, 2015
Q:

Why do control panel lighte stay lit on Kenmore Elite Ultra Wash Dishwasher, model 665-13944K010?

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your dishwasher and have a nice day.

Read More
Henry -
January 24, 2013
A:

Thank you for your question and I understand your concern.

Based on your symptom and details it could have a stuck key or a shorted circuit(s) in the keypad/touch panel or in control's input lines that read the keys. It could possibly have a faulty door switch too. Based on the dim

By design, if the door is opened for more than 5 seconds or power is interrupted during a cycle, the user must press the Start/Resume key to resume operation.

I strongly suggest calling a service technician to properly diagnose and repair your dishwasher. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 25, 2013
See more answers
Q:

How do I get the high temp and cancel/drain lights to turn off on my dishwasher?

A:

When you return from vacation the last thing you expect is for your appliances not to be working. I was able to find a link for a similar issue that may help. I attached the link below. An expert will respond shortly. I hope this is helpful.

Read More
Jackie S -
July 09, 2012
A:

Just wondering why an expert did not respond to my question.

Read More
Shelley -
July 10, 2012
A:

Hi Shelley,

Thank you for submitting a question to Manage My Life.

From your description this is most likely being caused by a faulty control board. The first thing I recommend is running the service diagnostics cycle. This cycle resets the control and restores program defaults. I am including this information in the images below. If the high temp and cancel/drain lights continue to stay on, you will most likely need to replace the main control.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your Kenmore Elite model number 665.13944K010 dishwasher .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
July 12, 2012
See more answers

Top Parts