Model #66513859K602 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Dishwashing runs throough cycle, but doesnt clean 66513859K602 Kenmore Elite Dishwasher

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore dishwasher.

I can understand the frustration of your dishwasher not functioning properly, after researching model number 665.13859K902. the noise is most likely coming from the pump. Before replacing the pump make sure there is not any debris stuck in the pump or drain hose. If all looks clear the pump may need to be replaced to solve the problem.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 29, 2015
Q:

#66513859K602 trying to replace dispenser. Which screws do we remove on the inside of the door to get panel off #66513859K602

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Why is my Kenmore dishwasher not cleaning?

A:

Something like this is usually caused by a low water charge or poor recirculation through the wash pump assembly. After the dishwasher fills open the door & inspect the water level. The water level should be approx 1 inch below the heating element. If you do not have the correct water level I recommend replacing the water valve part number 8563405. www.searspartsdirect.com If you have the correct water level I recommend checking the wash pump assembly. Please see the images provided below from the service manual explaining how to access & check the wash pump assembly. Other possibilities; stalled spray arms, not level & improper loading.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
April 19, 2010
A:

I have the same issue. I have replaced the pump motor and all of the interior plumbing but the top spray arm will not turn and does not appear to begetting sufficient water pressure. We have excellent house water pressure. The water level is fine. When draiing the pump makes a grinding noise like part of the impeller is broken. COuld this be the issue?

Read More
Joe -
August 07, 2013
See more answers

Top Parts