Model #66513799K602 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Dishwasher Door Pops Open during cycle 665.13799K602

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model665.13799K602; it sounds like you may need to replace the door latch. The door latch keeps the door closed so when it fails it can cause the door to open during use. I have posted a link of the door latch to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 01, 2015
Q:

Dishwasher Door Pops Open during cycle 665.13799k602

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model665.13799K602; it sounds like you may need to replace the door latch. The door latch keeps the door closed so when it fails it can cause the door to open during use. I have posted a link of the door latch to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 01, 2015
Q:

Dishwasher not cleaning 665.13799k602

A:

With the dishwasher not functioning properly can be frustrating. I have done some research on the Manage My Life website and have located a link similar to your issue. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
December 26, 2012
A:

Where is the link?

Read More
Marie -
December 26, 2012
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. First, make sure that you do not have the "Turbozone" wash option selected or water will not be diverted to the upper spray arm. If you do not have "Turbozone" selected and you can confirm that there is no water being diverted up to the upper spray arm, the diverter could be stuck in the "Turbozone" position. A broken wax motor plunger could keep from pulling the magnet away from the tank and cause the elbow valve to be stuck in the "Turbozone" position. This would restrict the water flow to the upper rack and cause the issue you're experiencing. The image below is the theory of operation and troubleshooting information. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
December 27, 2012
See more answers

Top Parts