Model #66513734K601 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Overflow And Drain Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Lower Washarm Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

sears dishwasher 66513734k601

A:

Based on your symptom and details the likely failure is that the control board does not detect the door being closed and latched. It could have a faulty door switch, door latch or latch bolt.

Read More
Joey S -
Sears Technician
May 04, 2010
A:

How can I ascertain which of the door switch, door latch or latch bolt are faulty?

Read More
jim -
October 24, 2015
See more answers
Q:

how to repalce the dishwasher hinge friction sleeves 66513734K601 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 66513734K601; to install the friction sleeve unplug the dishwasher power cord and shut off water supply to the unit. Open the dishwasher door and unscrew the screws securing the dishwasher tot the cabinet, so that you can pull dishwasher out. Pull dishwasher out enough to have access to the door hinges and close the dishwasher door. Lift the springs of the hinge to remove them and remove the friction sleeve if it’s still on the hinge it will slide out. Slide the new sleeve in to the lower indentation or curve past the one that the spring link goes on and reverse the process to reassemble the unit. Over time the sleeve will split and fall out.

 I have post thank for choosing Sears. I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 05, 2015
Q:

replacing the pump and motor assembly 66513734K601 Kenmore Dishwasher

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with replacing the dishwasher pump. We are here to help. The images below shows how to remove the spray arm and the pump assembly. I hope this helps.

To order dishwasher parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
October 19, 2013

Top Parts