Model #66513733K600 KENMORE Dishwasher

  • Door And Panel
    3 Results
  • Control Panel
    3 Results
  • Door And Latch
    3 Results
  • Lower Washarm
    3 Results
  • Heater
    3 Results
  • Fill And Overfill
    3 Results
  • Tub And Frame
    3 Results
  • Pump And Motor
    3 Results
  • Upper Rack And Track
    3 Results
  • Upper Wash And Rinse
    3 Results
  • Lower Rack
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dishwasher will not start. 66513733K600 Kenmore Dishwasher

A:

Thank you for choosing sears I would be happy to help you with your dishwasher. Upon researching model 66513733K600; you can reset the unit by unplugging the dishwasher power cord for 1 minute then reapplying the power. If the problem persists then you may need to replace the electronic control board. The control board governs the functions of the dishwasher, so when it fails it can cause the unit to not respond to the buttons on the control panel.  I have posted a link below of the control board.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
January 29, 2015
Q:

Why did my dishwasher quit working 66513733K600 Kenmore Dishwasher

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

the spin arm doesnt spin 66513733K600 Kenmore Dishwasher

A:

I know that it can be very difficult to have issues with your dishwasher. Check the spray arm for cracks or splits. Most Kenmore Ultra dishwashers have a manifold tube that docks into a feed tube assembly along the back wall inside the dishwasher. Look for damage on the manifold tube and the feed tube. Make sure that the feed tube is still properly connected to the pump outlet in the bottom of the tub. These tips may help you determine the cause of your spray arm failure in the dishwasher. If you don't feel comfortable doing this yourself, please click on the link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using ManageMyLife.com.

Read More
AnneJ -
Sears Technician
August 26, 2013

Top Parts