Model #66513689K602 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Is the chopper assembly blade in a Kenmore dishwasher supposed to be loose? 66513689K602 Kenmore Dishwasher

A:

I am sorry that you are having some difficulties with your dishwasher and I will be happy to help. I did some research and I was able to find a link with a similar question. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
January 31, 2013
A:

Thank you for your question and I understand your concern.

The chopper blade is spring loaded and it is normal for the blade to feel loose. The spring should pull the blade up against the perforated disc. You should be able to pull the blade away from the disc and the spring should pull it back up against the disc with minimal pressure.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
February 01, 2013
See more answers

Top Parts