Model #66513583K700 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Touch panel on 66513583K700 dishwasher loosing button switch labels. 66513583K700 Kenmore Dishwasher

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number 66513583K700 and the manufacturer has not advised on any problems with the overlay on the control panel. Whirlpool is the original manufacturer and if you have any questions or concerns you may contact them for more information. The part number for the panel is W10459133 for the black console and W10459134 for the white panel. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 14, 2015
Q:

Is there a reset button somewhere on my dishwasher?

A:

I use my dishwasher almost daily and I know how important it is to have a good working dishwasher. While you are waiting for an expert answer, I did manage to find a link that will provide you with some great information to help you with your dishwasher problem. I hope my link is useful.

Read More
Joseph P. -
March 21, 2011
A:

Thank you!

Read More
Denise -
March 21, 2011
A:

Thank you for your question and I understand your concern.

There is no re-set button to push. If the clean light was flashing then the link Joseph P. provided will provide the instructions on how to reset the flashing "Clean" light.

Having addition details would provide a better answer. If the dishwasher will not power up then it likely has a faulty thermal cut off (TCO) located inside the control panel. If it will power up but not start, then it could have a door switch failure or touch panel failure.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
March 23, 2011
See more answers
Q:

What could be causing my dishwasher to leak water and suds?

A:

Generally speaking, when a dishwasher leaks water and suds from beneath the door is an indication of using too much detergent or it's a brand of detergent that generates too many suds. Also if your water system is on a water softener you must reduce the amount of detergent or it will over suds and leak.

Did you just change brands of detergent? There are a few brands of dishwashing detergents that can cause too many suds and leak. I recommend using Cascade powdered automatic dishwashing detergents. Also if you’re using a liquid rinse aid in the dispenser and the dispenser happens to be leaking rinse aid into the dishwasher when it’s washing it could also cause the dishwasher to create suds and leak water on the floor.

The dishwasher could also be overfilling with water or not draining completely before the next fill cycle too causing the leak.

I recommend reducing the amount of detergent and then see if it still leaks.

If it still leaks, try running it will no detergent. If continues to leak I recommend calling a service technician to diagnose and repair your dishwasher.

Read More
Joey S -
Sears Technician
October 02, 2008
A:

Thank you. Already did these things before dismantling. Now we've caled the repair man who happens to also work on refrigerators-yep guess what went down this morning...

Read More
itavlas934 -
March 17, 2011
See more answers

Top Parts