Model #66513572K700 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dishwasher will not turn on, no lights...nothing. Did check breaker and power is going to appliance, but nothing..........where to begin? 66513572K700 Kenmore Dishwasher

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

SERVICE DIAGNOSTICS CYCLE NOTES
NOTE 1. To invoke the Diagnostics Cycle, perform
the following key presses or actions in less than
6 seconds while in standby:
Heated Dry ? Normal ? Heated Dry ? Normal

The following individual circuits are for use in diagnoses. Do not continue with the
diagnosis of the appliance if a fuse is blown, a circuit breaker is tripped, or if there is less than a 120 volt power supply at the wall outlet.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 27, 2015
A:
Natasha12 -
Sears Technician
July 27, 2015
See more answers
Q:

Water not reaching upper spray arm and spinner of dishwasher 66513572K700 Kenmore Dishwasher

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Kenmore Dishwasher Lights blinking for months

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dishwasher not working. We are here to help. Based on the symptom, I suspect the control panel is bad. The buttons flashing indicates a stuck or shorted button. The flashing should clear by pushing the stop/ cancel button. The service diagnostic ( first image) should confirm if the control panel is bad. If the dishwasher will not go into the diagnostic mode, replace the control panel. The part number for a white control panel is W10459134. The part number for the black control panel is W10137551. The second image shows how to replace the control panel. I hope this helps.
 
To order dishwasher parts, please visit SearsPartsDirect.com with the model number.
 
Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.
 

Read More
John H -
Sears Technician
September 28, 2013

Top Parts