Model #66513482K902 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Buttons on control panel not working properly 66513482K902 Kenmore Dishwasher

Q:

Kenmore dishwasher mod#665.13482K902 control panel buttons not activating properly 66513482K902 Kenmore Dishwasher

A:

Thank you for submitting a question to Manage My Life.

If you replaced part 10 that would be the wire harness. Check the thermal fuse it should read 0 ohms on your multimeter, you most likely still have a wiring issue or a control problem. The first thing I recommend is turning off the breaker for the dishwasher and checking the terminal block behind the toe panel. The terminal block is where the dishwasher is wired into the house electrical supply. These wires are most often secured with wire nuts and those connections often become loose. After you have ensured that these connections are good and have replaced the toe panel on the dishwasher, restore power and see if the buttons are working again.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsHomeServices.com. Here is a link that you may use to view the parts list diagram or purchase any parts needed for your www.SearsPartsDirect.com.

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post with details of what you find.

Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
August 16, 2013
A:

I'm having the same issue but part 10 is not the wiring harness. It is the dishwasher control board.

Read More
Loyd -
December 31, 2014
A:

the problem is some buttons on the control panel do not respond and the dishwasher starts up in the drying mode. Also the cycle sequence lights do not come on in the proper order. This is why I thought it was the control board rather than the control panel.

Read More
Loyd -
December 31, 2014
A:

I am having the same problem as Loyd.

Read More
Shari -
June 13, 2015
A:

I am having the same problem as Shari and Loyd wondering if it's the control board or control panel

Read More
Joe -
September 09, 2015
See more answers
Q:

Changing dishwasher door Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you with checking if you can replace your dishwasher  door to stainless steel. I did look into them model number you have provided, and I have found that that is an option.
You will only need to replace the outer panel to stainless steel and not the complete door.

 Click here for the door panel. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
August 08, 2014

Top Parts