Model #66513452K900 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Lower Washarm Parts
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Gasket on Kenmore 66513452K900 Kenmore Dishwasher

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

 

I am sorry and do understand your frustration when you are having problems with the dishwasher.

Glad to help out.   Im  looking at your Kenmore model number 665.13452k900.

The gasket is there to be of use so it won't leak all over the floor.  I wouldn't use it till I got it replaced because you will have to wipe up alot and ruin your floor.

Door seal for model 665.13452k900

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

 

Read More
Larry L -
Sears Technician
November 21, 2013
Q:

GASKET

A:

A Dishwasher is definitely something we depend and when starts malfunctioning it can be a big inconvenience. I have attached some links below well you are waiting for an expert to reply , that give great information on way this may be happening. Hope it helps!

Read More
Priscilla V -
August 17, 2011
A:

Hi Michael,

Thank you for submitting a question to Manage My Life.

I assume you are talking about the door gasket (W10284090). Here is a video that will show you how to replace this; Video .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
August 18, 2011
See more answers
Q:

How do I setup my new kenmore dishwasher to dry properly model# 66513452k900?

A:

Below I have provided you with your instillation guide. Hopefully this will provide you with enough information to get your dishwasher working properly. I hope this helps!

Read More
Jacqueline S -
December 03, 2010
A:

Thank you for your question and I understand your concern. You would expect a new dishwasher to dry dishes. First, I need to inform you that plastic ware will not dry because plastic does not absorb and retain water heat. Water puddles sitting on top of cups and glass will not dry also.

It's recommended to use rinse aid in the "Rinse Aid Dispenser" or the dishes will not dry properly. Remove the rinse aid cap and check the rinse aid setting. The number 2 setting is the normal setting but you can always turn it to a higher number too and see how well it dries.

Be sure the dishwasher is connected to hot water. The water entering the dishwasher must be a minimum of 120 degrees.

Be sure to select "Heated Dry" so that the LED is lit.

If all these recommendations are followed and the dishes still come out wet, I recommend calling a service technician to come out and diagnose the failure.

I recommend calling a Sears technician at 1-800-4MY-HOME or 1-800-469-4663 to diagnose this type of failure.

Read More
Joey S -
Sears Technician
December 03, 2010
See more answers

Top Parts