Model #66513132K700 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump, Washarm And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

My sears elite dishwasher will not drain the water completely out.

A:

Dishwashers are great at cleaning the dishes and saving time. I found some information for you that I am really hoping will help you out. I am adding the link below to help you with your question while you wait for your expert response. I do hope that this will help you with your dishwasher.

Read More
Marc -
August 07, 2012
A:

I know that it can be very frustrating to have issues with your dishwasher. The most likely cause of an incomplete pump out is a restriction in the check valve. The check valve is located threaded onto the base of the pump. The drain hose will be connected to the check valve. I recommend draining all the water out by pressing the cancel/drain button a few times to insure all the water is out.

  1. Disconnect the power to the dishwasher.
  2. Remove the lower toe panel by removing 4 screws securing the toe panel to the frame.
  3. Have shallow bowl or pan handy to slide under the check valve to catch water once you remove the drain hose.
  4. After removing the drain hose from the check valve, remove the check valve by turning it counter clockwise (CCW).
  5. Clean out any debris found inside the check valve and up inside the port where the check valve was removed from.

Retest the drain operation. If you do not feel comfortable doing this yourself, just click on this link to schedule service: Sears Home Services . To view a part diagram for your unit, just click on this link and enter the model number: Sears Parts Direct . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
August 08, 2012
See more answers

Top Parts