Model #66513124K703 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump, Washarm And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Kenmore dishwasher model 66513124k703 heating element or bimetal switch issue? 66513124k703

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number 66513124k703 and I recommend testing the heating element first. Here is a link that will help test the element. If the bi metal thermostat is damaged the dishwasher would not function at all. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 30, 2015
A:

Thank you for your reply. If the heating element is bad, then why would it come on during the diagnostic cycle? Thank you

Read More
Jeremy -
February 02, 2015
See more answers
Q:

Kenmore elite dishwasher model 665.13124K703 will cancel/drain, but will not (consistently) start.

A:

Thank you for your question.  I am sorry for the problem with your Kenmore 665.13124K703 Dishwasher.   From the description you give I suspect the problem is the keypad/console even though you say the keypad switches checked okay with a meter.  The image below contains more information on how to check the keypad.   I suggest you try the first test.  Turn the power off to the dishwasher and remove the console.  With the console down you can access the ribbon connector.  Disconnect the ribbon.  Shut the door and see if the dishwasher runs.  I hope this helps.  You can reply below with any additional details for further assistance.  Thank you for using Manage My Life. 

Read More
Fred M -
Sears Technician
October 07, 2013
A:

Thank you for your question.  I am sorry for the problem with your Kenmore 665.13124K703 Dishwasher.   From the description you give I suspect the problem is the keypad/console even though you say the keypad switches checked okay with a meter.  The image below contains more information on how to check the keypad.   I suggest you try the first test.  Turn the power off to the dishwasher and remove the console.  With the console down you can access the ribbon connector.  Disconnect the ribbon.  Shut the door and see if the dishwasher runs.  I hope this helps.  You can reply below with any additional details for further assistance.  Thank you for using Manage My Life. 

Read More
Fred M -
Sears Technician
October 07, 2013
See more answers
Q:

Part question on Kenmore Elite dishwasher, 66513124K703

A:

I did some research on the part and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
May 04, 2013
A:

I did some research on the part and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
May 04, 2013
A:

Hello Dmmoss. I am sorry to hear about the problems that you are having with that part.

 

The replacement part number that I see for Key 9 on the Upper Rack page is W10082853. That is a tine clip for the upper dishrack. Here is a link for that part that includes a photograph of that tine clip: Tine Pivot Clip for Kenmore Elite Dishwasher Model 665.13124K703

 

You can order that part from the above link.  It costs $4.72 for each of those tine clips.

 

If the dishwasher is less than 1 year old and still covered by the warranty, I recommend that you call Sears at this number to obtain replacement clips under the warranty: 1-800-469-4663 (1-800-4MY-HOME).

 

If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
May 06, 2013
See more answers

Top Parts