Model #66513123K703 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump, Washarm And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

kenmore heater coil 66513123K703 Kenmore Elite Dishwasher

Q:

heater coil wont get hot is new also new therostat 66513123K703 Kenmore Elite Dishwasher

Q:

Kenmore Elite dishwasher will not drain 665.13123k703

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dishwasher will not drain.

 
Drain loop check valve not sealing.

1. Disconnect drain hose at plumbing connection.
2. Elevate hose above dishwasher and fill with
water. If water flows into dishwasher, replace
entire drain loop (install as high as possible and
attach to underside of countertop if possible).

Sump will normally have about 2.4 cm (1 inch) of water remaining after cycle.

Obstructed drain hose or path. 
1. Unplug dishwasher or disconnect power.
2. Check for blockages from sump check valve to
customer’s plumbing. Potential items:
? Plugged garbage disposal or plug not knocked
out.
? Blocked/stuck sump or drain loop check valve.
? Plugged hoses.

Open winding on drain pump motor or loose/open connection in Drain Motor Circuit.
1. Unplug dishwasher or disconnect power.
2. Check resistances of drain motor windings and all
connections in Drain Circuit.

Drain pump impeller fractured.
 1. Unplug dishwasher or disconnect power.
2. Remove drain pump and check impeller by pulling
and rotating. If the impeller pulls off easily or turns
freely (normally there is some uneven resistance), it
is stripped. Replace drain pump.

Faulty drain motor drive circuit on control.
Check operation of drain motor during Diagnostics.

I have attached the dishwasher drain circuit.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 29, 2015
A:
Natasha12 -
Sears Technician
July 29, 2015
See more answers

Top Parts