Model #66513113K701 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

dishwasher not cleaning

A:

should have added: this is a Kenmore Elite QuietGuard Deluxe, model 665.13113k701

Read More
mary249 -
December 02, 2010
A:

Thanks for the model number it always helps.

From the description you give I suspect the problem is with the water level.

One thing to check is the water level. It should be within 1/4 inch of the element. Check this in the first wash cycle and check this at the final rinse and see if the level is the same.

If the upper rack seems to be the problem then one trick is to place small cups in each corner of the upper and lower rack and let the dishwasher fill and wash a couple or minutes. Check the water level in each cup and it should be almost the same in each cup.

Water heat is vital to dissolving the soap. At the end of the cycle the water should be hot and the dishes should almost be to hot to pick up.

The filters in the sump may be clogged with food. The image below will help you access the sump to check the filters and chopper screen.

This should be a start to resolving this problem.

You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
December 02, 2010
A:

Hello, I have the same symptoms as the person above, I also have model 665.13113k701. Nothing on the top rack gets clean at all, and items on the bottom rack get slightly but not completely clean. There is plenty of water heat. I have also noticed that when the dishwasher is open, the point where the probe from the top rack joins the tube (referencing the parts on your web site at the link below), the tube does not seal, it's always open. When i move the top dish rack to the lower position, the top whole in the tube still remains open. Though I have tried running the dishwasher with the top rack in both the upper and lower positions and it doesn't clean any dishes on the top rack in either case. I wonder if I need a new tube piece. http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-elite-Parts/Dishwasher-Parts/Model-66513113K701/0583/0130000/K1105131/00007?blt=06&prst=&shdMod=

Read More
Will -
May 19, 2013
A:

Will, if the docking port is not closing then there will be a loss of water pressure to the sprayarms. The W10077859 docking port is available from SearsPartsDirect. Here is the link: FeedTube .

Read More
Fred M -
Sears Technician
May 22, 2013
A:

The feed tube docking ports not sealing is not a commom problem but it can happen. If the problem just started and the dishwasher has not been moved recently then the docking ports being open is likely your problem.

Read More
Fred M -
Sears Technician
May 22, 2013
A:

The top rack of my dish washer isn't cleaning good I put a glass in each corner and the left rear is full the right rear is the next fullest followed by the forward left with the forward right having the least amount and this is how it cleans.

Read More
Harvee -
October 30, 2013
A:

Harvee, the water levels should all be the same. You can examine the holes in the upper spray arm and see if there is any sediment built up. If you have an adjustable upper rack then try raising/lowering it and see if the problem persists. Do you have the same model number as the one posted in the previous threads or do you have a different model number?

Read More
Fred M -
Sears Technician
November 03, 2013
A:

My dishwasher with the model number above does not clean the top rack. It will clean a very small number of dishes in the bottom rack and the door is never cleaned. What is the problem

Read More
Tommy -
December 21, 2015
See more answers
Q:

custom cabinet panel for elite dishwasher 66513113K701 Kenmore Elite Dishwasher

A:

Thank you for choosing Sears PartsDirect.com. Glad to help out. I'm looking at your model number 66513113k701 and yes that is possible. You will need to contact a contractor that does this type of customization. Frigo can also handle this type of build as well. 800-444-4944. The springs will need to be replaced with heavy duty springs to support the weight of the door part number GPF100 .I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 19, 2015
Q:

66513113K701 Kenmore Dishwasher detergent dispenser install instructions 66513113K701

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number 66513113k07 and here is a link for a video that will help with your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 08, 2014

Top Parts