Model #6620LCT SYLVANIA LCD Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

need a base 6620LCT Sylvania Tv lcd

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Based upon Sylvania model number of 6620LCT, I show the base or stand assembly as part number 1ESA12971. The manufacturer has since discontinued that stand, and Sears no longer has stock available for it at this time. 
There are some other miscellaneous parts like the neck or arm which goes from the base to the TV, rubber feet, and the stand cover, which we do still carry, but the stand is no longer.
You can try running an online search for the part number to see if you can still find one in circulation, but that would be the only feasible option I could foresee outside of contacting Sylvania for assistance with locating a substitute if that's even a possibility.
Sorry I couldn't be of more assistance with this and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
April 05, 2014
Q:

how can i switch this TV to cable mode?Model #6620LCT 6620LCT Sylvania Tv lcd

A:

Thanks for contacting ManageMyLife.com. I understand your concern with being able to switch the TV into cable mode. We are here to help. This TV automatically detects if the tuner signal is from cable or antenna. This is shown on page 3 of the owners manual. I hope this helps.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
September 26, 2013
Q:

need to instal base 6620LCT Sylvania Tv lcd

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
December 27, 2012
A:

Hello Betty,

I would like to assist you with your television base question. The screws that mount the base to the television are part number GBHP4180 and are a M4X18 metric screw. This part number is replaced at every supply house I checked with 'use replacement hardware' which means that they do not sell the part number so you will have to locally determine the type of thread that is used.

The stand is inserted into the base of the television and the screws are installed. Refer to the two images that are attached at the end of this reply.

This is a link to your owner's manual.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
December 27, 2012
See more answers

Top Accessories