Model #6565 KENMORE Fry pan

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Parts replacement assistance

A:

We're happy to help you Joan and I can understand the need for proper instruction.  I did find a link that provides some brief instructions for replacing that part.  Click here to view the instructions.  Keep in mind that an expert will be
responding within the next two business days if not sooner and will likely offer you more information and
instruction. I hope this information will be helpful and have a nice day.

Read More
Henry -
June 24, 2013
A:

Thank you for your question and I understand your concern.

I added a couple of wiring diagrams below that should provide the information you need to wire up the wire harness. These two wiring diagrams are the only two available.

 If you get to the point where you need to have a service technician fix this problem, you can carry the vacuum cleaner into your nearest Sears Repair Center or Sears Store. Here is a link for the Sears Service website that has information on the nearest repair facilities in your area: Sears Home Services.

Read More
Joey S -
Sears Technician
June 25, 2013
See more answers
Q:

Why did my Kenmore model 110.82983800 washer blow two starting capacitors?

A:

If two capacitor have blown then the motor switch is most likely the cause of this problem.

You will have to remove the washer cabinet to access the motor switch which is located on the motor.

One thing to note is the part number for the motor switch is 8529896 and will cost approximately $65.65 from the following link: Sears PartsDirect . The cost for the complete motor 389248 with switch is $155.76 from the same link.

The image below shows how to remove the cabinet and access the motor.

I hope this information helps resolve the problem but you can submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
August 01, 2009