Model #644 SOLO Chainsaw, Gas

  • Chain Saw Engine
    3 Results
  • Handle Bar
    3 Results
  • Starter
    3 Results
  • Crankcase Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

461.95882 Doesn't get cold Kenmore Compact refrigerator

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your fridge and I do understand your frustration. Glad to help out. I'm looking at your model number 46195882010 and the clicking sound will be associated with the compressor and starting device (pn db-644.33b) . It indicates that either the compressor is locked (stuck) or the starting device has failed. When the compressor tries to start but can't, it draws most of the current, so the lights will dim and the fans will slow down during this time. If you have further questions please resubmit your question for further information. I hope this information helps you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
August 12, 2014
Q:

Temperature Control erratic Danby Beer keg

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your cooler 
and do understand your frustration. Glad to help out. Im looking at your model number DKC645BLS and from your description it may be a failing thermostator pcb control.  The thermostat is available but the pcb is not. (PN 644.26) It is possible doing an online search for the part number through a thirdparty vendor. Research I have done indicates to a failing PCB control.  If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
June 10, 2014
Q:

Temp cannot be adjusted. If you try to adjust temp the kegerator beeps once and instead switches fahrenheit to celsiu DKC645BLS Danby Beer keg DKC645BLS Danby Beer keg

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your cooler and do understand your frustration. Glad to help out. Im looking at your model number DKC645BLS and from your description it seems like a failed control board. Disconnecting and then reconnecting the power resets the board. The board part number 644.26 for this unit is showing to no longer be available. I recommend trying an online search for a thirdparty vendor that may possibly stock a aftermarket item.  If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 16, 2014