Model #636796243 CRAFTSMAN Line Trimmer/Weedwacker/Brushwacker

  • Handle Assembly
    3 Results
  • Crankcase
    3 Results
  • Carburetor
    3 Results
  • Optional Accessories
    3 Results
Find part by diagram >

Question and Answers

Q:

Owner's Manual for 51.7 cc Brushwacker

A:

I can appreciate you're wanting to revive a Brushwacker that is older then my daughter.  Excellent.  It is very difficult to locate a manual on equipment that is this old.  But I was able to locate a manual I hope will be helpful to you.  Click here to view the link.  Keep in mind that an expert will be
responding within the next two business days if not sooner and will likely offer you more information and
instruction. I hope this information will be helpful and have a nice day.

Read More
Henry -
July 07, 2013
A:

I can understand how important it is to have the right information for your bush wacker. However, due to the age of this model the owner's manual is no longer available. Manufacturers usually stop producing this after 10 years. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 07, 2013
A:

Maybe a newer model would have enough information to reinstall the handles and give instructions to changing the blade and also for installing the line trimmer.

Read More
leonardson -
July 20, 2013
See more answers
Q:

Bushwacker 636.796243

A:

You definitely want that blade secure. While you wait for the expert, you might try the owner's manual linked below. I hope this helps.

Read More
Barbara -
February 16, 2013
A:

Thank you for your question. I will be happy to assist you. The image below shows where the blade should be installed. Click on the image to enlarge it.  Once you have the blade on the shaft slide the clamp washer on and secure it with the clamp nut. After you have it tight, thread on the cap nut. I hope this is helpful. Please let me know if you need further assistance.  Mark

Read More
Mark T -
Sears Technician
February 18, 2013
See more answers
Q:

What holds the blade securely to the Bushwacker Model # 636.796243?

A:

You definitely want that blade secure. While you wait for the expert, you might try the owner's manual linked below. I hope this helps.

Read More
Barbara -
February 16, 2013
A:

Thank you for your question. I will be happy to assist you. The image below shows where the blade should be installed. Click on the image to enlarge it.  Once you have the blade on the shaft slide the clamp washer on and secure it with the clamp nut. After you have it tight, thread on the cap nut. I hope this is helpful. Please let me know if you need further assistance.  Mark

Read More
Mark T -
Sears Technician
February 18, 2013
See more answers