Model #6334 SOUND DESIGN Misc Audio

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

High voltage wire harness on a garage door opener

A:

The Managemylife web site is a good resource to find out what may be happening with your Garage Door Opener. I did some research for you at Managemylife.com and found an excellent article that also has multiple expert answers at the bottom of the web page that addresses the most common questions that have been asked by other members. I hope this will help until your expert can answer your specific question. I attached the link below.

Read More
Alina -
June 08, 2013
A:

Thank you for your question and I understand your concern.

We do not have any wiring information for the high voltage harness. I called the manufacturer to see if they could supply the wiring information and waiting for a reply. When I hear any news I will let you know.

So that’s what I can tell you at this point. I can give you more detailed help when I get a reply from the manufacture.

Read More
Joey S -
Sears Technician
June 10, 2013
A:

Justin; I am waiting for the wiring diagram from the manufacture. He did not have it and so he had to requested one. He will E-mail it to me when he gets it.

Read More
Joey S -
Sears Technician
June 11, 2013
A:

Justin: I just got the response back from the manufacture and they do not have the wiring schematic. So, the only other solution is to order and replace the high voltage wire harness. The part number of the high voltage harness is 41A6334

Read More
Joey S -
Sears Technician
June 12, 2013
See more answers
Q:

Whirlpool LSR6334LQ1

A:

I understand that your Whirlpool washer is not spinning. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
October 05, 2012
A:

it does not spin nor remove the water. It seems it is perhaps the lid switch that is faulty. HOw do I install a lid sqitch in whirlpool LSR6334LQ1 to fix this problem?

Read More
Anonymous -
October 05, 2012
A:

To access the lid switch you will need to raise the console and remove the outer cabinet. There is a screw on the back side of the console that must be removed. The image below may be helpful with this. I hope this information is helpful to you. Remember to unplug the washer first.

Read More
Fred M -
Sears Technician
October 06, 2012
See more answers