Model #6303 KENMORE Toaster

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Freezer coils freezing up. 25352349302 Kenmore Refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

My dryer won't start, when you press start - it just clicks.

A:

I know how disappointing it is to find your dryer is not working. I would suggest providing the complete model number to better assist the expert. Just add to this thread. I hope all goes well.

Read More
Jackie S -
August 13, 2012
A:

Sorry - It's model 110.87511701. Hope that helps!

Read More
Kimberly -
August 14, 2012
A:

The problem might be a relay or it might be a push to start switch. For the best and most complete answer please reply with a model number for further assistance.

Read More
Fred M -
Sears Technician
August 14, 2012
A:

Thank -you Fred for your response. The model # is 110.87511701.

Read More
Kimberly -
August 15, 2012
A:

On this particular model the relay is part of the control. The control cost almost $200 dollars so checking voltage to the control would be a good idea if a meter is available and you feel comfortable checking voltage. Let me know and I'll provide some additional information.

Read More
Fred M -
Sears Technician
August 18, 2012
A:

Okay...i have a similar problem with the 110.6303. Is there something besides the switch or the belt that could cause this problem?

Read More
ed -
November 12, 2012
A:

Kimberly, the image below shows the wiring diagram for your particular dryer. If this dryer doesn't run then the thermal fuse or belt switch might be the cause of the no running. The images below may be helpful to you. You can reply with any additional details for further assistance. Remember to unplug the dryer first.

Read More
Fred M -
Sears Technician
November 13, 2012
See more answers
Q:

Bagger Chute

A:

Trying to install the wrong size attachment is not worth the time or energy. I completely understand wanting to get the correct chute. The expert will review your information and respond within two business days if not sooner.

Read More
Barbara H. -
May 04, 2012
A:

Thank you for your question.

I will be happy to assist you. Usually the adapter kit is part of the tow behind vacuum. Originally, the unit shook have come with a plastic boot and templates. The boot is a plastic part that has an opening for the hose and you have to cut out the hole for the mower deck. That is where the templates come in. Once you have the hole for the deck cut, you use the supplied hardware to attach the boot to the mower. If you could please reply below with the model number of the tow behind vacuum, I will be happy to look up the adapter kit for your unit.

I hope to hear from you.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
May 06, 2012
A:

Thank you for your question.

I will be happy to assist you. Usually the adapter kit is part of the tow behind vacuum. Originally, the unit shook have come with a plastic boot and templates. The boot is a plastic part that has an opening for the hose and you have to cut out the hole for the mower deck. That is where the templates come in. Once you have the hole for the deck cut, you use the supplied hardware to attach the boot to the mower. If you could please reply below with the model number of the tow behind vacuum, I will be happy to look up the adapter kit for your unit.

I hope to hear from you.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
May 06, 2012
A:

The local Sears Outlet Store gave me Model numbers 917248960 and 917248961 as possible bagger numbers but could not confirm if either would fit my lawn tractor. They also provided a Bagger Chute Number 187300, $63.03, but again could not confirm if it would attach to my mower deck nor if it's discharge end would accept the 6" diameter flexible hose intake of the Lawn-Vac. The Sears Customer Service Representative I recently spoke with could not fink a Model Number and of course not a Part Number for the Bagger Chute that fits my Lawn Tractor's mower deck. He said managemylife would be able to find it for me, please make contact through www.managemylife.com. As you request, my Lawn-Vac is manufactured by Swisher Mower & Machine Co. Inc. and it's Model Number is LV87537 with Serial Number - L1 07-122007. I didn't order an adapter kit from Swisher because I didn't want to spend a lot of time and frustration on fashioning a permanent fit-up boot to my mower deck cancelling out the mulch and side-cast options that i desire to keep available. I guess you must be having a problem, like me, in finding a Part Number for a Bagger Chute that can be confirmed will fit my mower deck and accept connection of a 6" diameter flexible hose. Thirty years ago my father's Craftsman lawn mower with bagger attachment had a bagger chute that clipped onto the mower deck just like the mulch kit discharge cover did. It had a discharge end that a 6" flexible or rigid tube would readily fit onto. That Bagger Chute was MADE-TO-FIT that mower deck. It worked very well, no cut gaps reducing air/clippings flow efficiency. I think a made-to-fit Bagger Chute is out there with a part number waiting to be ordered to fit my new mower. Let's find it, please.

Read More
Rudy -
May 07, 2012
A:

Rudy, I looked up the bagger for your tractor. The bagger for your model is 917.249170. The part number for the lower chute is 187300 and can be ordered from the following link. This chute is molded to fit your deck. I am not sure what the size the outlet is. If you are close to a store, you can swing in and measure the tubes on one of the floor models. If it will work for you it can be ordered here . You might want to order all the straps that secure it to the mower deck. Please let me know how this works. Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
May 08, 2012
See more answers