Model #63016309401 KENMORE ELITE Dishwasher

  • Control Panel
    3 Results
  • Front Door
    3 Results
  • Cabinet Assy
    3 Results
  • Pump Assy
    3 Results
  • Base Assy
    3 Results
  • Rack Assy
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

reset codes 63016309401 Kenmore Elite Dishwasher

Q:

Dishwasher not filling for rinse cycle 630.16309401

A:

I know that it can be very frustrating to have issues with your dishwasher. From what you are describing, it sounds like you do have an internal component problem. You should be able to shut off the breaker and access the fill valve to check the resistance of this component. Remove one wire (with electrical power disconnected) and measure the resistance across the leads of the water valve. You should measure about 1K ohms (1000 ohms) with a volt/ohm meter. If not, then the fill valve will likely need to be replaced. If the fill valve is okay, then you could have a wiring failure, a stuck float switch or a failed control board that would prevent the dishwasher from filling. Also I have include images of the testing information for this model. If you don't feel comfortable doing this yourself, please click on this link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 07, 2013
Q:

Drain Pump runs continuously

A:

Good morning.... I can understand your concern and you've done a good job at trying to get to the bottom of this problem. I did locate a link that will discuss this situation in greater detail. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might wrong with your dishwasher and have a nice day.

Read More
Henry -
December 23, 2012
A:

Thank you for your question and I understand your concern.

I provided the answer to your first question in the link below.

Dishwasher pump cintinues to run and cycles randomly

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 24, 2012
See more answers

Top Parts