Model #63016302403 KENMORE ELITE Dishwasher

  • Front Panel
    3 Results
  • Door Assy
    3 Results
  • Cabinet Assy
    3 Results
  • Pump Assy
    3 Results
  • Base Assy
    3 Results
  • Rack Assy
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Kenmore Elite 630 fills, has lights on display wont wash 630.16302403

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand the frustration with having an issue with you unit. Let’s see what we can do for you.

 Looking at all the information provided. I'm suspecting an issue with the door latch. The lights will come on and you can choose cycles, but if the latch isn’t making a proper connection then you won’t be able to start. I suggest replacing the door latch.

Also you can try; pushing on the top of the dishwasher with you palm (in the middle where the door latch would be). Try and run a cycle if it starts the cycle release your hand if it stops then replace the door latches. Door latch for this Kenmore is 603198. Click on the part number to get more information/ order.

 Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. If you have any further questions or concerns, you will have to post a new question. Again, thank you for choosing SearsPartsDirect.com.

Read More
Samantha A -
Sears Technician
August 06, 2014
Q:

i need to know how old my kenmore elite dishwasher is . the model number i2 63016302403

A:

Knowing how old the dishwasher is can be very helpful. I researched both numbers but was not able to find information on the unit.  Your expert will answer within two business days.  Thank you for using Manage My Life.

 

Read More
Yadira B -
March 21, 2013
A:

Thank you for submitting your question. I understand the need for this information and I will be happy to assist you. I show that your dishwasher is a 2005 model. I hope this helps. If there is any other information I can assist you with, please reply back to this thread. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
March 22, 2013
See more answers
Q:

Kenmore Elite 630.16302403 (Bosch) dishwasher - cycle never finishes

A:

I know that it can be very inconvenient for you not to have your dishwasher working properly. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
October 25, 2012
A:

Having this condition with the dishwasher would be upsetting. The dishwasher does pause while heating the water to the correct temperature. It does not sound like this is the issue but it is worth considering.

I suspect this may be due to the fill valve, float switch or the control.

The float may be hung up, sensing there is already water in the tub. See the first image below to access the float. Remember to disconnect power to access these parts

To check the water inlet for blockage, shut off the dishwasher power and water supply. Remove the toe panel, water supply hose or tubing and 90 degree elbow and look for debris in the water inlet. You may need needle nose pliers or tweezers to remove debris. Reconnect elbow, water supply and toe panel, turn on dishwasher water supply and check by running a cycle.

If the water inlet is clear and the float valve checks ok, you can use the testing procedures in the second and third images to diagnose further. If you do not feel comfortable checking these items, you can schedule a Sears technician here; Sears Home Services .

If further help or information is needed, please reply. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
October 25, 2012
See more answers

Top Parts