Model #63013913010 KENMORE ELITE Dishwasher

  • Control Panel
    3 Results
  • Door Assy
    3 Results
  • Cabinet
    3 Results
  • Pump
    3 Results
  • Base Assy
    3 Results
  • Baskets
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

soap dispenser 63013913010

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to remove the dispenser on your dishwasher. I did look into the model number you have provided and I have found information to assist you.

I have attached the photo to assist you.

Let me know if this helps.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 30, 2014
Q:

Dishwasher will not start 630.13913010

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
June 12, 2013
A:

Thank you for your question. Check the control lock to see if that feature is enabled. If it is, you can disable that lock by pressing and holding the Heated Dry key for a few seconds or until the lock icon goes off.

According to the owner's manual, the heated dry option is automatically selected as "on" for every cycle except Fast Wash and Quick Rinse. You can turn that option off by pressing that button.

Check the door switch make sure it is not loose or damaged and it is okay. If the cycle will not start and work properly then the electronic control board in the console is probably causing this problem. You can try to fix this failure by replacing that board. Take a picture of the wires before disconnecting then connect the new board in the same manner you removed the old one.You can order that part from the www.searspartsdirect.com. Shut off the house circuit breaker for the dishwasher before accessing internal components.

If you need more help, reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.searshomeservices.com

 

Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
June 14, 2013
See more answers
Q:

Why won't my dishwasher start?

A:

I'm sorry to hear that you are having some difficulties with your dishwasher. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Barbara H. -
January 07, 2012
A:

The flashing lights are indicating an error code. I've provided an error code chart in the image below. The error code will indicate what's going on with the dishwasher. You can reply with any additional details or questions for further assistance.

Read More
Tykara -
Sears Technician
January 10, 2012
See more answers

Top Parts