Model #629.46775 MAYTAG Ranges, Electric

  • Top Assembly
    3 Results
  • Internal Controls
    3 Results
  • Body
    3 Results
  • Body (serial Prefix 11)
    3 Results
  • Oven/base
    3 Results
  • Oven/base (serial Prefix 12)
    3 Results
  • Door/drawer
    3 Results
  • Door/drawer (serial Prefix 11)
    3 Results
  • Door/drawer (serial Prefix 12)
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore slide in range 629.46775 629.46775

A:


Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 06, 2013
A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your range and do understand your frustration. Glad to help out. Im looking at your model number Thank You for choosing Sears PartsDirect.com. I regret to 


hear that you are having issues with your 


and do understand your frustration. Glad to help out. Im looking at your model number 62946775690.

 
SAFETY WARNING: Before you begin your repair, be sure to disconnect the power supply to the range. Also, internal parts may have sharp edges that may cause serious cuts. Use caution or wear heavy gloves.

If you recently used the stove, let it cool completely before starting. To lift the main top, you will need to open the oven door. At the top of the oven opening, below the overhang of the cooktop, you will see 2 screws in the corners. Those screws will need to be removed to release the cooktop. Once the screws are removed, tilt the front edge of the cooktop up slightly and pull gently forward at the same time. Don't pull it too far, just enough so that you can reach behind the back edge of the cooktop to disconnect any wiring. NOTE: Before you disconnect wiring, make note of how they hook up to make it easier to reconnect them later. Now you can remove the top. If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com


Read More
Sherman_G_Wallace -
Sears Technician
December 06, 2013
See more answers
Q:

Clock on/off and broiler on F2 showed 629.46775 Maytag Kenmore cooking

A:

Thank you for choosing SearsPartsDirect.com. I am sorry to hear that your are receiving this error code of F2 on your range model number 629.46775. I know how this can cause the worries your are having. F2 does indicate that the clock is damaged or faulty. The board is what controls the element and may be causing the broiler to come on on its own. I do recommend having a technician go out and replace that control board. You can give my team a call at 1800-469-4663. I hope you get your range all settled. Have a great day!

Read More
Samantha A -
Sears Technician
December 04, 2013
A:

Thanks for getting back to me. I now have removed the clock board and will get replaced...once I removed the clock board, put electrical tape over the ends of the three pigtails, put the power back onto the range to use the stovetop the broiler in the oven still GOES ON AND THEN OFF, is that normal until I replace the clock board? I also ordered a new oven range temp sensor. Please advise . tHANKS, rANDY

Read More
RJ -
December 04, 2013
See more answers
Q:

How do I lift the ceramic cook top on my Kenmore range model 629.46775?

A:

The images below show how to lift the top on a similar model of Kenmore range. This information may work for your range but I cannot be sure. Your range may be slightly different than the one shown below. You may need to remove the console in a manner similar to the bottom image to access screws that secure the glass cook top to the frame. Be sure that you shut off the breaker to disconnect electrical power before accessing internal range components.

You can view a parts list diagram for the range on the Sears PartsDirect website. The parts list diagram may help you lift the top.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
October 31, 2009
A:

There is nothing shown below?

Read More
john -
December 02, 2013
See more answers