Model #629104X87 MURRAY Snowthrower, Gas

  • Snow Thrower
    3 Results
  • Electric Start Assembly
    3 Results
  • Engine
    3 Results
  • Frame Components
    3 Results
  • Drive Components
    3 Results
  • Gear Case Assembly
    3 Results
  • Auger Housing
    3 Results
  • Discharge Chute
    3 Results
  • Wheels
    3 Results
  • Handle
    3 Results
  • Handle
    3 Results
  • Chute Rod
    3 Results
  • Decals
    3 Results
  • How To Order Repair Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

engine oil plug 629104X87 Murray Murray snow thrower

A:

Thank you for your question.

 

I will be happy to assist you. I looked up your model number you submitted. If I remember correctly, this model has an oil drain plug located below the recoil starter. You should see a small pipe sticking out under the starter with a cap on the end. Just remove the cap and allow the oil to drain into a pan. Then tip the engine back slightly to ensure all the oil is drained out. The image below shows the drain plug on a similar model. Click on the image to enlarge it.

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
October 25, 2013
Q:

Engine oil plug 629104X87 Murray Murray snow thrower

A:

Thank you for your question.

 

I will be happy to assist you. I looked up your model number you submitted. If I remember correctly, this model has an oil drain plug located below the recoil starter. You should see a small pipe sticking out under the starter with a cap on the end. Just remove the cap and allow the oil to drain into a pan. Then tip the engine back slightly to ensure all the oil is drained out. The image below shows the drain plug on a similar model. Click on the image to enlarge it.

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
October 25, 2013