Model #6286367910 KENMORE Ranges, Electric

  • Backguard And Cooktop Assembly
    3 Results
  • Body Assembly
    3 Results
  • Door And Drawer
    3 Results
  • Wiring And Wiring Terminals
    3 Results
  • Optional Porcelain Pan And Ring 8067110
    3 Results
Find part by diagram >

Question and Answers

Q:

Locating a Owners Manual for a older Kenmore electric Range!

A:

When it comes to locating the manual for an appliance can be frustrating as well quite challenging. I have taken the time to research your model on the Manage My Life website,which there was no available information on this model. However While you are waiting for a detailed reply from an expert I recommend visiting the Sears parts direct website were you can view a full parts list and diagram of your model you may also purchase the manual through the site. I have provided the link below. Hope this helps!

Read More
Priscilla V -
March 15, 2012
A:

I was able to find the replacement part that I needed, as well as an assembly diagram of the area the part is installed in. No detailed information, however, on replacing the part. The part is the thermostat.

Read More
Phil -
March 15, 2012
A:

That owner's manual is no longer available as a replacement part in hard copy. I did not find a digital copy of the manual online. It does not appear to be available in any form.

Your last post seems to indicate that you need to replace that thermostat. I can provide some general information that may help. Unplug the range before accessing internal components. You should be able to access that oven thermostat in the console by removing the back panel. You will see a sensor probe that is routed down to the oven cavity. You will need to pull that oven sensor probe out and note the routing so that you can install the new probe in the same manner. Note the positions of the wires on that existing thermostat. Pull the wires off and then connect them in the same locations on the new thermostat. Pull the knob off of the front of the existing thermostat. Remove the screws that mount that thermostat in the console and then replace it with the new one. Route that sensor probe down to the oven cavity and then reassemble the range.

This general information may help you complete that repair. If you need more assistance, reply with additional details (maybe some digital pictures would help us see what you are looking at).

If you get to the point where you need to have a service technician replace that thermostat, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 15, 2012
See more answers
Q:

range model # 6286367910 parts no longer available through sears range works fine handle broken off any suggestions other than a replacement range

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
September 22, 2011
A:

The handle has been substituted to part number 5303303529. The price of the new handle is $45.99.

Read More
Jimmy K -
Sears Technician
September 24, 2011
See more answers