Model #62720996 CRAFTSMAN Welder

  • Fig. A - Cylinder Block Oil Base And Gear Cover Group
    3 Results
  • Valve Group
    3 Results
  • Crankshaft And Flywheel Group
    3 Results
  • Camshaft
    3 Results
  • Connecting Rod
    3 Results
  • Fuel System Group (gasoline)
    3 Results
  • Carburetor (gasoline) Parts Group
    3 Results
  • Fuel Pump Parts Group
    3 Results
  • Governor And Throttle Group
    3 Results
  • Magneto
    3 Results
  • Oil Pump
    3 Results
  • Housing, Stop Button And Gauge Group
    3 Results
  • Readi-pull Starter Group
    3 Results
  • Carrying Frame And Battery Group
    3 Results
  • Dolly Group
    3 Results
  • Generator Group
    3 Results
  • Control Box
    3 Results
  • Vaporizer Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

craftsman welder will crank and run but will not weld. model #62720996

A:

Having an appliance that is not working properly can be frustrating. I have taken the time to research the model on the Manage My Life website,however was not able to locate any information regarding model do to incorrect model. While you are waiting for an expert to reply I recommend to confirm the model is correct and reply back to this thread with the detailed model number to your Welder. Which this will allow an expert to reply with a detailed answer.

Read More
Priscilla V -
March 15, 2011
A:

Thank you for your question.

If the generator/welder has not been run in some time it most likely, need to have the fields flashed. The easiest way to flash the fields is with a corded drill. Please click on this link to view the instructions for flashing the fields . If that does not produce voltage to the outlet, there is an internal part failure. A qualified technician should diagnose this type of problem because of the dangers when making the checks.

Please let me know if you need further assistance on the generator/welder.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 16, 2011
See more answers