Model #625348490 KENMORE Water softener

  • Water Softener
    3 Results
  • Brine Valve Assembly
    3 Results
  • Bypass Body
    3 Results
  • Valve Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Error 1 code 625.348490

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your water softener. Upon researching model  625.348490 ;  since the motor has already been replaced, the error 01 code could be caused by a wiring harness or switch connection, switch position or he face plate.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 28, 2015
A:

I finally figured out that I the problem may be the Switch. Now I am just trying to find the correct switch to replace it with.

Read More
John -
July 28, 2015
See more answers
Q:

Drain the entire softener of water #625.348490

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

If you go to kenmorewater.com it will allow you to open the unit and troubleshoot the unit.  
http://www.kenmorewater.com/

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 28, 2015
Q:

Wrong bypass body? 625348490 Kenmore Water softener

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I recommend contacting our customer care department so they can get you the correct part. You would need the correct male fitting in order to attach the bypass valve. Customer care will be able to assist you further regarding the wrong part.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 02, 2015

Top Parts