Model #625 PORTER CABLE Wrenches and Accessories

  • Impact Wrench
    3 Results
Find part by diagram >

Question and Answers

Q:

blinking red lights on kenmore elite 665.13752k601 dishwasher ! HELP!!!!!

A:

Thank you for your question.  From the description you give I suspect you have a stuck or shorted keypad.  There is a way to check this problem without a meter.  The instructions are in the image below.  If you follow the instructions you wil be able tell if the Console is the problem or if the control is at fault.  I hope the instructions below are helpful to you .  You can reply below with any additional details for further assisstance. 

Read More
Fred M -
Sears Technician
November 18, 2013
A:

Thank you for your question.  From the description you give I suspect you have a stuck or shorted keypad.  There is a way to check this problem without a meter.  The instructions are in the image below.  If you follow the instructions you wil be able tell if the Console is the problem or if the control is at fault.  I hope the instructions below are helpful to you .  You can reply below with any additional details for further assisstance. 

Read More
Fred M -
Sears Technician
November 18, 2013
A:

Fred, would you mind posting a higher resolution image of the instructions you posted in 2013 above? The image is currently too small. I am interested to read the instructions to test for a stuck or shorted keypad on my dishwasher, same model. Thank you for your help.

Read More
Michael -
January 26, 2016
A:

Hi, I was inquiring about procuring a manual for a GE dishwasher model number being gdt625psj0ss.

Read More
Joseph -
February 01, 2016
A:

PLease send a higher resolution, its really small

Read More
Thuan -
February 01, 2016
See more answers
Q:

Kenmore Elite Hybrid Water Softener - 38520, Model: 42-38520

A:

ManageMyLfe.com is a great place to find your owner's manual and installation guides for appliances. I did some research and found the owner�s manual. I have attached the link below. Your expert will follow up and verify this information shortly. If you are having a specific problem please submit your question on the existing tread by click on the reply box below for your expert.

Read More
Priscilla V -
November 27, 2011
A:

Thank you for your request for the water softener manual.

I will e-mail you the 625.385200 Hybrid water softener manual.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
November 29, 2011
A:

Can you tell me why my newlt installed Kenmore water softner salt tank is FULL of water?

Read More
Earl -
November 29, 2011
A:

Hello Earl: The usual reason for the salt storage tank to be full of water is that the venturi for drawing the brine back into the resin is stopped up and it just continues to add brine water and not draw any back for regeneration. There are instructions on the underside of the lip on the softener to clean the venturi. Once you have that done you will need to remove the salt and water from the salt storage area and once you have the water out you can return the salt to the unit. You will need to leave about 3 to 4 inches of water on the bottom for the brine will to use for the next regeneration after clean up. I will provide you with a link to Kenmore water.com so you can look at the interactive sight for troubleshooting your water softener. I hope this will help. Sam A.

Read More
Sam A -
Sears Technician
November 29, 2011
A:

My Kenmore Elite Hybrid water softener dosen't have water in the salt container. Is that Ok?

Read More
Fernando -
August 04, 2012
A:

Thank you for your question. Look down the black brine well tube and you should see about 2 to 3 inches of water that would be below the salt line. Normally you should not see water unless you are out of salt. Sam A.

Read More
Sam A -
Sears Technician
August 07, 2012
A:

I just installed this Kenmore Elite Hybrid water softener and I don't know if it is working properly. I installed it yesterday and looked in the brine tube today and the brine tube was bone dry. I am currently doing a manual regen during the day while the household is active. I'm wondering if I need to stop the regen or what to do at this point. My main question is should there be water in the brine tank during the day during normal use? Regards

Read More
Paul -
January 31, 2016
A:

I just installed this Kenmore Elite Hybrid water softener and I don't know if it is working properly. I installed it yesterday and looked in the brine tube today and the brine tube was bone dry. I am currently doing a manual regen during the day while the household is active. I'm wondering if I need to stop the regen or what to do at this point. My main question is should there be water in the brine tank during the day during normal use? Regards

Read More
Paul -
January 31, 2016
See more answers
Q:

kenmore water softener tank is full of water and will not drain

A:

With the tank on the Kenmore water softener full, I can understand your concern. The link below is on a similar issue with a water softener. I hope this will be useful information while waiting for additional information from an expert.

Read More
Anna T -
September 18, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the water softener. Usually when the salt tank fills with water, it is because the nozzle venturi is plugged. If you cleaned the nozzle venturi, you need to run a regeneration cycle for the water to go down. It might take a few cycles for it to go all the way down. If you have done this, I recommend double checking the nozzle venturi. It is common to reassemble it with the gasket upside down. If it is reassembled correctly, I recommend visiting our Kenmore water website. The site has animated diagnostics to aid in repairing the softener. Click here to be taken to that site.


I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
September 19, 2012
A:

I have the same problem . I was sent the diagram/instructions on cleaning the nozzle venturi . It was all clean. I regenerated and it is stll full of water - which makes sense because I did not have a clogged venturi. maybe I put the gasket on upside down? I assumed it was on correctly because it did not leak when it started regenerating. Can you show me how it should look so I can make sure I didnt fowl things up?

Read More
justin -
January 03, 2013
A:

Found the problem using the great animated diagnostics above. it was a cracked brine line going to the float assembly. I put a small tube in it and now its draining! thanks a million.

Read More
justin -
January 05, 2013
A:

Justin, I am glad to hear you found the problem and found the website to be helpful. I must say, I have never seen the brine tube crack. I will start telling customer to check that as well. Please let me know if you need further assistance. Mark T.

Read More
Mark T -
Sears Technician
January 06, 2013
A:

I have a ultrasoft 200 the display only shows HOLD u cant change it even if u unplug it . none of the buttons work. I tried servicing everything and it filled the brine tank but the whole time it said hold and once full nothing else happened . any idea?

Read More
Chris -
January 16, 2016
A:

I have a ultrasoft 200 the display only shows HOLD u cant change it even if u unplug it . none of the buttons work. I tried servicing everything and it filled the brine tank but the whole time it said hold and once full nothing else happened . any idea?

Read More
Chris -
January 16, 2016
See more answers