Model #6230 DIRT DEVIL Vacuum, Upright

  • Frame Assembly
    3 Results
  • Wiring Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

Which motor do i order? MAV9501EWW

A:

Thank you for choosing SearsPartsDirect.com. I know how important it is get the correct parts for your washer machine. I see here the part number you need is going to be 21001950. You can give us a call at 1800-366-7278 or you can click here. I hope this helps you. Have a great day!

Read More
Samantha A -
Sears Technician
March 21, 2014
Q:

i have a air comp. model no. 106175781, i need part no. vt161, whic is not available, can i change this and still use ac.

A:

I understand how it could be frustrating trying to get the proper parts for your compressor. When a part is no longer available is mainly due to the age of the appliance,which you may want to think of purchasing a new compressor. While you are waiting for a detailed reply from an expert I recommend visiting the sears.com website were you may browse the many types of compressors. I have attache the link below. Hope this helps!

Read More
Priscilla V -
March 08, 2012
A:

The air compressor will not work correctly without the unloader tube.

Part number vt161 is a piece of 1/4 inch outside diameter copper tubing. You can buy a piece of 1/4 inch copper tubing at most hardware or builders supply store. You will probably need to replace the nuts and ferrules on the tubing also.

Read More
Jimmy K -
Sears Technician
March 09, 2012
A:

the copper tube is good, i ned the end, it looks like a special end, i know it wont work right, can i plug this off and turn ac off when it gets so much pressure.

Read More
robert dingess -
March 09, 2012
A:

You can't plug it up Robert. The unloader tube lets the pressure out of the discharge tube when the compressor turns off. This lets the compressor start back without a load on it. If you plug the unloader the compressor won't start back after it turns off. The fitting the copper tube connects to should be a standard pipe thread (probably 1/4 inch) that you can buy at a hardware store. I think you can find a fitting locally.

Read More
Jimmy K -
Sears Technician
March 09, 2012
A:

i know i can get the fiting and tube, but that is what i dont need. on the end where tube hooks to pressure switch, it is gone. i need that end that makes it kick off, if not air will come of tube. there has to be something to screw into pressure switch.

Read More
robert dingess -
March 10, 2012
A:

Robert, the fitting you need is a 90 degree fitting with pipe threads, that screw into the pressure switch, on one end and compression threads for a compression nut with ferrule on on the other end. I think it is a 90 degree fitting, it might be straight. The fitting is what screws into the pressure switch and the tubing connects to the fitting. I don't think we are communicating here. I apologize if I am not making myself clear to you. Go to www.searspartsdirect.com and look at the parts diagram for the air compressor. Item 64 is the compression fitting that screws into the compressor. You need the compression fitting that screws into the pressure switch.

Read More
Jimmy K -
Sears Technician
March 12, 2012
A:

there is no place on my switch to screw nothing in, i understand what you are talkingabout, the piece on the switch where the fitting screws in is missing on my switch

Read More
robert dingess -
March 12, 2012
A:

Robert, I apologize for not thinking correctly. The unloader tube does not connect to the pressure switch. It goes into the side of the pressure switch and when the compressor cuts off it bleeds the pressure off the compressor discharge into the pressure switch. It can just as easily bleed the pressure outside the pressure switch. There should not be any air coming out of the unloader tube until the compressor turns off. Please forgive my wrong thinking and let me know if I can help with the problem.

Read More
Jimmy K -
Sears Technician
March 12, 2012
A:

THERE IS AIR COMING OUT OF TUBE WHEN IT IS RUNNING, THE COMPRESSOR WILL NOT BUILD UP BECAUSE OF AIR COMING OUT OF TUBE.

Read More
robert dingess -
March 12, 2012
A:

Okay Robert, I did some more research on the air compressor. There should be a valve attached to the pressure switch that the unloader tube connects to. The valve is closed while the pressure switch has the motor turned on. When the pressure switch trips to the position to stop the motor, it opens the valve and lets the air bleed out of the unloader tube. To repair the air compressor, you need to replace the pressure switch and the unloader tube.

Read More
Jimmy K -
Sears Technician
March 12, 2012
See more answers