Model #61994 KENMORE Curtains-Porch

  • Headrod -6160
    3 Results
  • Headrod -61604
    3 Results
  • Headrod 6164
    3 Results
  • Headrod - 61644
    3 Results
  • Headrod - 6199
    3 Results
  • Headrod - 61994
    3 Results
Find part by diagram >

Question and Answers

Q:

How can I get me garage door to work?

A:

The Managemylife web site is a good resource to find out what may be happening with your Garage Door Opener. I did some research for you at Managemylife.com and found an excellent article that also has multiple expert answers at the bottom of the web page that addresses the most common questions that have been asked by other members. I hope this will help until your expert can answer your specific question. I attached the link below.

Read More
Joseph P. -
November 19, 2011
A:

From each sensor you should have 2 wires. A solid white wire and a white wire with a black stripe. The white wires go to terminal #2 and the wires with the black stripe go to terminal #3 on the rear of the motor unit.

Read More
Don -
November 21, 2011
A:

The wiring information Don gave is correct for your opener. Connect the wires and then try the machine and see if everything works as it should.

If it does not please stop back by and let me know along with any details of what happened when you tried it.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 21, 2011
See more answers