Model #6175 MILWAUKEE Saw Cut-Off

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

is there a rice cooking setting? JVM6175DF1WW Ge Microwave/hood combo

A:

Thank you for choosing sears I would be happy to help you with your microwave. Upon researching model JVM6175DF1WW; this model does not have a specific setting for rice.

 

I trust that this information will help you, thank you have a great day.                

Read More
CarlosZ -
Sears Technician
May 13, 2015
Q:

Microwave oven shut down JVM6175SF1SS

A:

Thank you for being a Sears' valued member and for contacting SearsPartsDirect.com with your question about your new microwave. I am so sorry you are having issues with it shutting off. For safety issues, we do not give technical advice on microwaves on this forum.

Because this is a new product, your problems will be taken care of under your warranty. Your best course of action is to contact our Sears Home Services department. Our technical specialist will take you through a few steps to see if the problem can be resolved over the phone. If our advisor cannot resolve the issue for you, our advisor will schedule a technician to come to your house and diagnose and fix the microwave for you. To contact Home Services go to www.SearsHomeServices.com or call 1-800-4MY-HOME (1-800-469-4663). 

I want to apologize for the frustration this situation has caused you. The good news is your warranty should take of this problem. If you have questions about something not covered by the warranty, please resubmit your question with additional details and we will be happy to assist you further. Thanks you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
September 20, 2014
Q:

Frigidaire replacement instructions

A:

Detailed instructions can really come in handy when doing some major repairs. I did some research and I was able to find a link that will guide you with your repair. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
June 28, 2012
A:

Thanks Joseph. The instructions I received where for the ***9010 switch, but I just checked the new part and it is the same part number as the original switch. So does anyone have the wiring for the 318191023? Thanks. - Mark

Read More
Mark -
June 28, 2012
A:

The original wiring diagram for the range is shown in the image below. That may help you wire up that switch if it exactly matches the original switch that is part 318191023. If that part did substitute to switch 903097-9010 then you can use the information in that previous answer that Joseph P. posted should help you wire that new switch.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician install that burner switch, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
July 02, 2012
A:

Fridigaire PLES389DCB. My bridge element went bad. I ordered a new one from Sears and the parts man promised me there would be a wiring diagram in the box with the part. There was NO diagram. The new paart has been reconfigured therefore the part shorted out when I turned the burner on. The part # 318258201 is the replacement part. Does anhyone have a wiring diagram for this part? Thanks,, Donna

Read More
Donna -
November 27, 2013
See more answers