Model #610742121 KENMORE Stove - Wood

  • Door Assembly
    3 Results
  • Ash Pan Assembly
    3 Results
  • Exterior Body Assembly
    3 Results
  • Fire Box & Heat Exchanger Assembly
    3 Results
  • Blower Assembly
    3 Results
  • Wiring Junction Box Assembly With Transformer
    3 Results
Find part by diagram >

Question and Answers

Q:

Old Sears wood/coal furnaced,

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life. �

Read More
Joseph P. -
October 12, 2011
A:

Thank you for your question on the thermostat operating the damper controller.

It sounds like you will need to attach the thermostat, so when the thermostat is calling for heat it will open the damper control on the furnace.

You thermostat has a 24 volt power supply and you will need to use a meter to check the contacts in and out of the thermostat so when the thermostat is calling for heat the 24 volts is being sent to the damper board to open the control damper.

Because you have a new thermostat that probably has a heat and cool for ac setting you will need to connect to the Y terminal on the thermostat and set the thermostat to ac or cool to then open and close the damper door.

If you still need help for the furnace you can call 1-800-358-0060 in Minnesota for help on this old Yukon built wood furnace.

Please let me know how it works out.

Sam A.

Read More
Sam A -
Sears Technician
October 13, 2011
See more answers