Model #59672213200 KENMORE Bottom-Mount Refrigerator

  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Controls
    3 Results
  • Refrigerator Shelving
    3 Results
  • Interior Cabinet & Freezer Shelving
    3 Results
  • Evaporator Area & Rollers
    3 Results
  • Compressor
    3 Results
  • Cabinet Back
    3 Results
  • Ice Maker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Storage capacity for Kenmore Bottom Mount Fridge 596.72213200 596.72213200

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore refrigerator.  

From the information you have provided above, after researching model number 596.72213200. this model is 22cubic feet.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
May 22, 2015
Q:

freezer not cold

A:

Check for mouse damage in the back of the unit or nesting around the coils under the unit.

Read More
Dave -
August 16, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. Your defros system consist of the defrost timer (67001036), defrost heater (67001794) and the defrost bi-metal (12001937). The best way to check the defrost system is to advance the timer manually. Turn the timer knob slowly until it clicks and the unit stops running. After a few minutes open the freezer door and listen for some hissing and popping. This will be the ice melting on the defrost heater. If you hear this, it indicates the timer is not advancing and will need to be replaced. If nothing happens, disconnect the power to the unit and access the evaporator coils and defrost heater. Disconnect the wires to the heater and check the resistance with an ohms/volt meter. If you get any reading at all, the heater is good but if you get no reading, the heater will need to be replaced. The thermostat attached to the refrigerant line is the defrost bi-metal. It's a safety device to keep the heater from overheating and damaging the refrigerator cabinet. It's checked the same way the defrost heater is. Disconnect the wires and check for continuity. If it's open, no reading, the thermostat will need to be replaced. These checks must be done when the evaporator is cold and frosted up. Here is a refrigerator repair video to check the defrost system. The model is different from yours but the checks will be the same. You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
August 17, 2013
A:

Yes, we had a similar problem and that fixed it for our's. But now our thermostat is also dead.

Read More
Cynthia -
August 17, 2013
A:

Here's that video.

Read More
Tykara -
Sears Technician
August 17, 2013
See more answers
Q:

What is the manufacture date of my kenmore refrigerator 596-72213200?

A:

It is always good to know how old the appliance are in case you want to replace it. An expert can verify this information for you within 24-48 hours. If possible, submit the serial number also. If you have any issues with it, just click on reply with additional information.

Read More
Anna T -
July 17, 2012
A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you submitted. This refrigerator was manufactured in 2002. If you would like to know the exact date, please reply below with the serial number. The serial number has the exact date.


I hope this is helpful.

Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
July 19, 2012
See more answers