Model #59670003002 KENMORE Bottom-Mount Refrigerator

  • Door Panel And Grille
    3 Results
  • Control, Hinges And Shields
    3 Results
  • Evaporator Area
    3 Results
  • Shelving
    3 Results
  • Crisper, Deli Frame/water Filter
    3 Results
  • Cabinet Back/water Valve Assembly
    3 Results
  • Machine Compartment
    3 Results
  • Bottom Hinges And Rollers
    3 Results
  • Condenser Assembly
    3 Results
  • Shelf Ladders And Light Assembly
    3 Results
  • Door Assembly
    3 Results
  • Ice Maker Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to remove handles on refrigerator 59670003002 Kenmore Refrigerator

A:

Thank you for the inquiry and for using SearsPartsDirect.com.

The manual isn't too helpful in this situation, I agree. I also have a tech manual at my disposal that isn't helpful either. However, after looking at the schematic, it appears there are three (3) handle clips that are secured onto the left part of the door panel by screws. From there, it looks as though the handle would slide down over the clips. I would suspect that you could lift or push up on the handle to remove it from the side of the door panel.

Before attempting the door reversal, make sure the right side of the door will accommodate the handle clips and screws, it almost appears as if this door is not reversible. If I had more documentation and resources, I would be able to give more details. The handles and outer door panels for this unit have all been discontinued by the manufacturer, so be cautious with the removal so you don't damage anything, because you won't be able to get a replacement.

For convenience purposes, I have included a blue link below that you may click on to be directed to the PartsDirect webpage to view the schematic and parts breakdown for this door. Hopefully that helps.

Door Panel Schematic for Model 59670003002

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
August 24, 2013
Q:

kenmore help!!!!!

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
December 27, 2011
A:

I'm sorry you're having problems with the refrigerator. When something "works intermittently" it can be difficult to diagnose.

I may need a few more details to help you with a practical suggestion but there are some things you might consider.

If the problem is just with one particular section, freezer/refrigerator, then the problem is usually one of air flow. The fans may not work all the time or the air ducts may ice over and not work properly.

If the problem is the entire unit stops cooling then the problem tends to be with the compressor.

A sealed system leak problem wouldn't be an intermittent problem. Once it stopped cooling it would stay that way.

There are two fans to check. One would be the condenser fan by the compressor. The other would be the freezer fan. Try to verify both are working.

I hope this helps. You can reply and get a speedier answer by thread to any additional details or questions.

Read More
Fred M -
Sears Technician
December 28, 2011
See more answers
Q:

What are screws (A or B) for described on Page 4 of the manual?

A:

If you turn screw A to the right this raises the rear leveling roller. If you turn screw B to the right this raises the front leveling roller. Make these adjustments on both sides to level the unit.

Read More
biker dave -
Sears Technician
October 24, 2009

Top Parts